Home >> Products >> Other Valves >> Pneumatic Angle Seat Valve |
|
Pneumatic Angle Seat Valve Pneumatic Angle Seat Valve
Angle Seat Valve Characteristics 5. The cylinder is made of stainless steel, which is more excellent in harsh environments and can be rotated 360°. 1. High flow rate,low fluid resistance, no water hammer, Y-type design increases 30% flow rate. 2. Position indicator: The limit switch and emergency manual are adaptable. 3. Easy installation: Actuator 360°rotated free. 4. Automatically valve stem position correction, Self-lubricating PTFE seal, maintenance-free, good stability. 5. Multi actuators to adapt different working status, normal, high temperature, heavy corrosion, etc. 6. Long working life. 7. High-frequency switch, High sensitivity. Technical Parameters Size：1/4"~3"(DN8~DN80) Working pressure: 0-1.6MPa (0-232psi) Controlling pressure: 0.3-0.8Mpa (43.5-116psi) Seal material: PTFE Valve body material: 304/316/316L Actuator material: Stainless steel, Aluminum, Engineering plastic Function: Normal open, Normal closed, Double-acting, Free status Controlling medium: Air / neutral gas Applicable medium: Water, neutral gas or liquid, alcohol, oil, organic solvent, steam, dyestuff, acid-base, lye and weak acid solutions etc. Medium viscosity: Max600mm²/s Medium temperature: -29℃—+200℃ Environment temperature: -10℃—+80℃ Connection: Thread (BSP, NPT-F), welded, flanged, tri-clamp A: upstream installation / B: downstream installation Leakage class: DIN EN 12266 A class Working principle
Application range
|
Contact Us |
Products |
Navigation |
Follow Us |
Add: 1808, No.8 Fuzhou Road, Qingdao, Shandong, China 266071 Tel: +86 532 8580 3230 Email: [email protected] Http://www.safval.com |